Good Performance Power Steering Pump

Function of the Power Steering Pump
1. The power Steering Pump is the power source of the hydraulic power Steering System. It uses the engine as the transmission medium to transfer mechanical energy convert into hydraulic energy. The steering gear converts hydraulic energy into mechanical energy through the hydraulic oil output from the oil pump, thereby reducing
The driver's operation intensity enhances the maneuverability of the entire vehicle;
2. Control the internal pressure of the power steering pipeline through a pressure safety valve to ensure the safety of the steering system;
3. Control the flow of the steering system through the flow control valve to ensure that the driver's steering hand is turned when the vehicle is traveling at high speed.

Critical parameters:

Cause of failure and troubleshooting:

The oil level of the oil storage tank drops rapidly, and the hydraulic oil leakage is serious.

Causes of failure:

1. The connecting pipes of each part are damaged, the joints are not tight, and there is leakage.

2. The oil storage tank is damaged.

3. Steering gear oil seal is damaged.

4. The oil seal of the booster pump is damaged, and the hydraulic oil flows into the engine oil pan.

Remedy:

1. Check all connecting oil pipes and joints.

2. Replace the oil storage tank.

3. Disassemble the steering gear and replace the oil seal.

4. Overhaul the booster pump and replace the oil seal.

When such a fault is found, stop the machine in time to prevent the hydraulic oil from being mixed into the engine oil, causing the oil to deteriorate and causing the engine crankshaft to burn out.