Efficient Power Steering Pump

Product Attributes

Packaging and Delivery

　　Sales Unit: Piece
　　Packaging Type: Paper Box, Pallet

Description　　
Precautions
　　When installing the steering pump, consider whether there is any trapped air in the pump body, and take venting measures if necessary. Air should be expelled from the steering system, usually it is sufficient to vent air from the oil outlet of the steering pump. The specific method is to loosen the oil outlet joint when the engine is not running, and tighten it again if there is oil leakage. At this point, start the engine, turn the steering wheel left and right, and all the air will be expelled into the oil reservoir and released into the air through the breather.
　　Dedicated hydraulic connectors should be used for the inlet and outlet of the steering pump and actuator. When matching, pay attention to the joint passage area, which should meet the minimum pipe diameter area requirements.
　　"The steering pump joint should be sealed with an O-ring as much as possible, and it is not allowed to apply sealant on the joint during connection." The sealing form of the joint should match the sealing form of the oil inlet and outlet of the steering pump. The corner seal should use an O-ring sealing form, and the end face seal of the steering pump joint should use a composite sealing washer + copper nut sealing form.
Key Parameters