- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
Product Details
OEM Power Assisted Steering Pump
Subcategory
Keywords
- Description
-
Product Attributes
Model No.：FZB30B19B1
Brand：FZB
Place Of Origin：ChinaPackaging & Delivery
Selling Units：Piece/Pieces
Package Type：PAPER BOX, PALLETPicture Example
Product Description
Function of safety valve
Adjust the pressure output by the pump at different engine speeds, and limit the maximum pressure of the oil in the power Steering System. The safety valve body is fixed to the front end of the flow control valve plunger through threads. When the ball valve in the safety valve and the plunger cavity where the safety valve spring is located increase to the specified maximum pressure in the oil outlet hole, the small steel ball in the safety valve will overcome the tension of the spring in the safety valve and compress the spring to move backward. (Path: Part of the high-pressure oil in the oil outlet flows through the pump outlet to the small hole on the pump valve screw, to the throttle hole on the pump control valve body, to the steel ball in the jacking safety valve, to the inner cavity of the safety valve, and then flows into the pump overflow hole (C). At this time, the pressure at the bottom of the pump control valve momentarily decreases, causing the balance pressure previously established by the throttle hole at the front and rear ends of the pump control valve to be broken, and the slide valve plunger is momentarily pushed to the bottom end of the valve cavity, Connect the oil outlet hole to the oil inlet chamber completely, and at this time, the pump will not deliver oil outwards, and the oil will circulate inside the pump. At this time, the normal hissing sound of the pump at this position for pressure relief can be heard.
Critical parametersPart Name Hydraulic Power Steering Pump Function Provide hydraulic fluid to steering gear Type Vane pump DARE PN FZB30B19B1 REF. PN 5990955190 OEM PN 94704486 Application GM AGILE 1.4 (0.9/…)
GM CELTA VHCE (0.9/…)Nom. Displacement 6.88 ml/r Max. Pressure 6.5-7.5 Mpa Speed Range 550~7000 rpm Flow Rate 7±1 L/min Inlet Port Ф16 mm Outlet Port M16X1.5 Direction of Rotation Right MAINTENANCE TIPS
The use and maintenance of the steering gear booster pump is particularly important, therefore, the following must be done:
1. The correct selection of hydraulic oil is the key to ensure high efficiency and prolong the life of the booster pump.
2. Regularly check the oil level of the oil storage tank. If it is insufficient, clean hydraulic oil should be replenished in time. The filter element in the oil storage tank should be cleaned with alcohol during maintenance.
3. If leakage, impact or abnormal noise is found in the steering gear booster pump during use, it should be checked and eliminated in time.
4. After the vehicle has been running for a period of time, the hydraulic oil filter elements should be replaced in time, especially after the new pump is installed and used for 2500-3000 kilometers, the hydraulic oil should be replaced.
Related Products
Product Consulting
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible
Solutions for your industry
If you are interested in our products, please leave your email.
Our Products
Find out about our latest products
Contact Us
Contact Person:Mr. WANG
Telephone:+86-418-3399321
Mobile Phone:+86-15904225596
E-mail：wangyong@dare-auto.com
Address: No. 55, E road, Economic Development Zone, Fuxin, Liaoning
